- Can I add 4gb and 8gb RAM together?
- Can I use 2 different Ram brands?
- Does MHz matter buying RAM?
- Is 1600MHz RAM good?
- Is 2133 MHz RAM good?
- Can you put ddr3 1333 instead of 1066?
- Can I use different MHz RAM together?
- Which is faster 1333mhz or 1600mhz?
- Does faster RAM work slower motherboard?
- What is the difference between 1333MHz and 1600MHz RAM?
- Do motherboards have RAM speed limits?
- Does RAM increase FPS?
- Does RAM speed matter?
- Can I use 2400mhz RAM with 2666mhz RAM?
- Is 3000 MHz RAM good?
- Can I add 8gb RAM to 4gb?
- Can I use 1600MHz RAM on a 1333MHz board?
- Why does my 1600MHz RAM shows 1333MHz?
- Which RAM is faster 1333 or 1600?
- Can I put 1600mhz ram in a 1066MHz slot?
Can I add 4gb and 8gb RAM together?
Usually you can but it depends on the motherboard.
There are chips which are 4GB and 8GB, in dual channel mode this will not work.
But you would still get 12GB total only a little slower.
Sometimes you will have to swap the RAM slots since the detection has bugs..
Can I use 2 different Ram brands?
As long as the types of Ram you mix are the same FORM FACTOR (DDR2, DDR3, etc) and voltage, you can use them together. They can be different speeds, and made by different manufacturers. … Different brands of Ram are fine to use together.
Does MHz matter buying RAM?
RAM frequency is measured in MHz and usually immediately follows the DDR version in the RAM spec. For example, 8GB DDR4-2400 RAM is running at a frequency of 2400MHz. … This is why though higher frequency RAM is technically faster, that additional speed often does not translate into better actual real world performance.
Is 1600MHz RAM good?
In general it is good enough and it actually is the fastest kind of memory supported on locked Intel motherboards before socket 1151. Though if you have a Z87/Z97 motherboard and unlocked K cpu, then getting memory faster than 1600MHz can be beneficial.
Is 2133 MHz RAM good?
a 6600k with a mild overclock (or even stock settings) and 16GB of 2133MHz RAM should be plenty good for some 60hz 1080p gaming.
Can you put ddr3 1333 instead of 1066?
Technically yes. Your motherboard will automatically down clock the 1333 RAM to 1066 to match the other stick. However, it’s always a good idea to buy modules in pairs.
Can I use different MHz RAM together?
You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.
Which is faster 1333mhz or 1600mhz?
2 Answers. The 1600Mhz CL10 RAM has a higher clock speed (800MHz versus 666MHz) and a lower latency (12.5 ns versus 13.5 ns), so it’s the hands down winner. So, even though CL10 is a higher divisor than CL9, the increase from 1333MHz to 1600MHz in the numerator is more than enough to compensate for that.
Does faster RAM work slower motherboard?
Your computer will work just fine if you install the faster RAM. It will simply run at the slower 1333Mhz speed. Your motherboard will recognize those faster RAM sticks as being compatible (because they are) and allow the system to boot up and operate normally after you install them.
What is the difference between 1333MHz and 1600MHz RAM?
Hello. There is really no performance difference between running the RAM at 1333MHz compared to 1600MHz. The reason to buy 1600MHz is if you are heavily OCing. When you OC the CPU (unless you’ve got an unlocked multi like the 955) you also change the frequency the RAM.
Do motherboards have RAM speed limits?
Both motherboards and CPUs have RAM (memory aka DIMM) speed limits. Your actual speed limit will be the lower of the two. That being said, depending on what applications you use, you could be fine with 2133 MHz. … Both motherboards and CPUs have RAM (memory aka DIMM) speed limits.
Does RAM increase FPS?
Does More RAM Mean More FPS? … And, the answer to that is: in some scenarios and depending on how much RAM you have, yes, adding more RAM could increase your FPS. Games require a certain amount of memory to run. The amount of memory that games require to run can vary from game to game.
Does RAM speed matter?
Your RAM’s speed does not alter how fast your CPU goes, even when overclocked or hyper-threaded, but it can slow the CPU down depending on if your RAM is full or not. … For the most part, the faster your RAM speed is, the more likely you are going to have success working on large files.
Can I use 2400mhz RAM with 2666mhz RAM?
It can work together, there is a possibility, but when you pair both together, they run at the same speed. The 2666mhz would downclock to the 2400MHz speed since memory cannot run at different clocks.
Is 3000 MHz RAM good?
3000 mhz is good, as the price for higher probably not worth it. People saying it doesn’t matter should really do there research. Yes at one time it made no difference but now that there are less bottlenecks in the system, RAM is starting to become the bottleneck.
Can I add 8gb RAM to 4gb?
If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)
Can I use 1600MHz RAM on a 1333MHz board?
The compatibility of the ram depends more on your motherboard than your cpu. If your motherboard supports the 1600mHz, then it is likely that the g3258 will also. However, the cpu spec sheet says that it only supports up to 1333mHz, so if you use 1600mHz sticks it may downclock them to 1333mHz.
Why does my 1600MHz RAM shows 1333MHz?
You do have to enable XMP profile in BIOS to get 1600 MHz. 1333 is the default and every RAM set rated for that speed or faster will default to 1333. Go to the overclocking section of your BIOS and poke around for RAM timing and there should be an option for enable XMP. Just save and boot into windows to check it.
Which RAM is faster 1333 or 1600?
The 1333 and 1600 designations refer to the transfer rates – theoretically, given same CAS latency, DDR3-1600 would perform better than DDR3-1333 due to its greater maximum bandwidth.
Can I put 1600mhz ram in a 1066MHz slot?
Yes , but RAM speed will be only 1333mhz at max if it is only the one stick being used . … both RAMs will run at same speed. If ur first RAM is operating at max 1066mhz then no matter what ,your new RAM will also run at 1066 And the rest of the story anyone can understand of course.